home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Format CD 49
/
Amiga Format CD49 (2000-01-17)(Future Publishing)(GB)(Track 1 of 3)[!][issue 2000-02].iso
/
-serious-
/
hardware
/
ioblixusr37_11
/
ioblixusr37_11.readme
< prev
next >
Wrap
Text File
|
1999-11-29
|
2KB
|
56 lines
Short: V37.11, IOBlixZ2 and IOBlix1200 software update, 16-Nov-99
Author: tboeckel@uni-paderborn.de (Thore Boeckelmann)
Uploader: tboeckel@uni-paderborn.de (Thore Boeckelmann)
Type: hard/drivr
List of recent changes:
ioblixser.device/ioblix12ser.device
37.11:
- finally made EOF mode really work. The changes before didn't actually really
work and made Miami and AmiTCP/Genesis hang when connecting to the ISP.
ioblixpar.device/ioblix12par.device
37.11:
- if your printer garbles the first page then you can force the port to a
specified mode by setting ENV:IOBlix/ParPort??Mode, where "??" is the port
number with leading zeroes (ie ENV:IOBlix/ParPort01Mode for the second
port). Setting this variable to "ECP" forces ECP mode, "PPF" forces normal
mode. Without this variable or any other content enables the automatic test,
which for some printers may cause trouble.
ioblixzip.device/ioblix12zip.device
37.11:
- using a Zip drive and a printer simultaneously at one port should now cause
no more garbage during printing when Zip drive is switched off and the
AutoMounter is active
IOBlix-Handler
37.11:
- just a revision bump
SetupIOBlix
37.11:
- fixed a crash when quitting an relaunching auto mounter
- now checks for AGA when looking for IOBlix1200 modules in order to avoid
incorrect recognition on A500 and A2000. Therefore SetPatch MUST have been
run before, but that should be no real limitation.
- when trying to replace old versions of ioblix.resource wrong structure
layouts have been used, causing alerts, Enforcer hits and crashes. This
version now has special remove code for all versions back to 37.6.
This very annoying behaviour occured for most people when updating to a new
release of the IOBlix software.
- when checking parallel ports a reset is transmitted to attached devices to
avoid problems with some printers after a system reboot
- using a Zip drive and a printer simultaneously at one port should now cause
no more garbage during printing when Zip drive is switched off and the
AutoMounter is active